JVC GY-HM600E Page 38 Instructions Manual Download

Page: 38 / 148

Inserting an SD Card

This camera recorder comes with two card slots

(Slot A and B) for video/audio recording and

playback.

Open the SD card cover.

Insert an SD card with the notched corner

pointing up.

The status indicator of the card slot to which the

card was inserted lights up in red.

Close the SD card cover.

Card Slot Status Indicator

The following table shows the respective states of

slot A and B.

Lamp

Slot Status

Lights up in

red

The inserted SD card is being

accessed. (writing/reading data)

Do not turn off the power of the

camera recorder or remove the SD

card.

Lights up in

green

On standby. The inserted SD card

can be used for recording or

playback.

Light goes out

SD card is not inserted.

An unusable card is inserted.

An SD card is inserted but a

different slot is selected.

Removing the SD Card

Check that the SD card to be removed is not

being accessed (status indicator of the

card slot lights up in red).

Open the SD card cover.

Push the SD card and remove it from the

slot.

Close the SD card cover.

Memo :

When both slots are inserted with usable SD

cards, the previously selected slot is used.

Caution :

Data may be lost if you turn off the power of the

camera recorder or remove the SD card when it

is being accessed. All data recorded on the

card, including the file that is being accessed,

may be corrupted. Be sure to check whether the

status indicator is lit in green or turned off before

you turn off the power or remove the SD card.

If you mistakenly remove the card when it is

being accessed, reinsert the card only after the

status indicator goes off.

The SD card may not be recognized if you insert

and remove the card within a short time. When

this happens, remove the card and wait for a few

seconds before you reinsert.

ati

ons

Summary of Contents for GY-HM600E





















































































































































Search results

Summary of Contents for GY-HM600E

Reviews:

Related manuals for GY-HM600E

Brands by name

Popular brands

JVC GY-HM600E, Instructions Manual

Search results

Summary of Contents for GY-HM600E

Reviews:

Related manuals for GY-HM600E

Brands by name

Popular brands