JVC GY-HM600E Instructions Manual Download Page 25

Page: 25 / 148

Settings and Adjustments

Before Use

Adjusting the Grip Belt

Open the pad and adjust the position of the grip belt

accordingly.

AUX

INPUT2

INPUT1

DEVIC

BATT.RELE

ASE

POWE

/CHG

HDMI

REM

OTE

HD/SD

SDI

REC

Caution :

If the grip is loose, the camera recorder may fall

off resulting in injuries or malfunction.

Attaching an External Microphone

You can attach a separately sold microphone to the

microphone holder.

1, 3

Turn the knob on the microphone holder

anticlockwise to loosen and open the

microphone holder.

Place the microphone in the microphone

holder.

Turn the knob on the microphone holder

clockwise to secure the microphone.

Connect the microphone cable to the

[INPUT1] or [INPUT2] terminal.

Pin the microphone cable to the clamp.

Perform the settings for the microphone

correctly.

(

P61 [Audio Recording] )

Attaching the Tripod

Use the screw hole at the bottom of this camera

recorder.

(3/8×16UNC, 1/4×20UNC)

Use the screw hole that suits the tripod.

To prevent the camera recorder from falling off,

which may result in injuries or damages, read the

instruction manual of the tripod to be used and

make sure that it is securely attached.

Bottom

Caution :

Use the tripod on a stable surface.

To prevent the camera recorder from falling,

attach securely using the rotation prevention

hole.

Use screws with screw length 5 mm and below.

Attaching the Large Eyecup

Attach the large eyecup (supplied) to prevent

external light from entering the viewfinder

screen and cameraman’s vision.

Align and attach to the groove of the eyecup

mounted on the camera recorder.

The large eyecup can be attached in any

direction.

Large Eyecup (supplied)

Eyecup

Memo :

Do not remove the eyecup that is premounted

on the camera recorder.

ati

ons

Summary of Contents for GY-HM600E





















































































































































Search results

Summary of Contents for GY-HM600E

Reviews:

JVC GY-HM600E, Instructions Manual, Page: 25 / 148

Search results

Summary of Contents for GY-HM600E

Reviews: