JVC GY-HM600E Page 15 Instructions Manual Download

Page: 15 / 148

License Notices

MPEG LA AVC

THIS PRODUCT IS LICENSED UNDER THE AVC

PATENT PORTFOLIO LICENSE FOR THE

PERSONAL USE OF A CONSUMER OR OTHER

USES IN WHICH IT DOES NOT RECEIVE

REMUNERATION TO (i) ENCODE VIDEO IN

COMPLIANCE WITH THE AVC STANDARD

(“AVC VIDEO”) AND/OR (ii) DECODE AVC VIDEO

THAT WAS ENCODED BY A CONSUMER

ENGAGED IN A PERSONAL ACTIVITY AND/OR

WAS OBTAINED FROM A VIDEO PROVIDER

LICENSED TO PROVIDE AVC VIDEO. NO

LICENSE IS GRANTED OR SHALL BE IMPLIED

FOR ANY OTHER USE. ADDITIONAL

INFORMATION MAY BE OBTAINED FROM

MPEG LA, L.L.C. SEE

HTTP://WWW.MPEGLA.COM

MPEG LA MPEG-2 Patent

ANY USE OF THIS UNIT IN ANY MANNER

OTHER THAN PERSONAL USE THAT

COMPLIES WITH THE MPEG-2 STANDARD FOR

ENCODING VIDEO INFORMATION FOR

PACKAGED MEDIA IS EXPRESSLY

PROHIBITED WITHOUT A LICENSE UNDER

APPLICABLE PATENTS IN THE MPEG-2

PATENT PORTFOLIO, WHICH LICENSE IS

AVAILABLE FROM MPEG LA, LLC, 6312 S.

Fiddlers Green circle, Suite 400E, Greenwood

Village, Colorado 80111 U.S.A.

oduction

Summary of Contents for GY-HM600E





















































































































































Search results

Summary of Contents for GY-HM600E

Reviews:

Related manuals for GY-HM600E

Brands by name

Popular brands

JVC GY-HM600E, Instructions Manual

Search results

Summary of Contents for GY-HM600E

Reviews:

Related manuals for GY-HM600E

Brands by name

Popular brands