Special Recording
Besides the normal recording mode, four special
recording methods are available in this camera
recorder. They are Pre Rec, Clip Continuous,
Frame Rec and Interval Rec.
Select a mode from [Main Menu]
B
[System]
B
[Record Set]
B
[Rec Mode].
Memo :
0
Special recording cannot be selected when [Main
Menu]
B
[System]
B
[Record Set]
B
[Record
Format]
B
[System] is set to “HD+Web” or “High-
Speed”.
Pre Rec
0
By setting the number of seconds in the [Pre Rec
Time], you can start recording video and audio
before actual recording starts based on the [Pre
Rec Time] setting.
0
When starting actual recording while the camera
recorder is in Recording Standby (STBY
P
)
mode, you can start recording a few seconds
earlier based on the [Pre Rec Time] setting.
0
Using Pre Rec allows you to record a complete
event without missing the initial scenes even if
you start the recording late.
Memo :
0
Pre Rec Time can be set in [Main Menu]
B
[System]
B
[Record Set]
B
[Rec Mode]
B
[Pre
Rec Time].
The following values can be selected depending
on the setting of [Main Menu]
B
[System]
B
[Record Set]
B
[Record Format]
B
[System].
0
When [System] is set to “4K”:
Fixed at “5sec”
0
When [System] is set to “HD” or “SD”:
“5sec”, “10sec” or “15sec”
.
(Recording stops)
Press [REC]
(Recording starts)
Press [REC]
Recording starts a
number of seconds
earlier based on the
[Pre Rec Time] setting
(Recorded video and audio)
Completed Clip
1
Set [Rec Mode] to “Pre Rec”.
0
Set [Main Menu]
B
[System]
B
[Record
Set]
B
[Rec Mode] to “Pre Rec”.
0
The display changes (“STBY”
B
“STBY
P
”).
2
Press the [REC] button to start recording in
Pre Rec mode.
0
The display changes (“STBY
P
”
B
“
R
REC
P
”) and the card slot status indicator
lights up in red.
0
Press the [REC] button again to pause
recording. The display changes (“
R
REC
P
”
B
“STBY
P
”) and the card slot status
indicator lights up in green.
Caution :
0
When the interval between start and stop
recording is short, “STBY
P
” may not be
displayed immediately after recording is
complete.
“
R
REC
P
”
B
“STBY
P
” (“STBY” blinks in red)
B
“STBY
P
” is displayed.
0
When the SD card becomes full during
recording, recording stops and “STOP” is
displayed.
0
In the following cases, video and audio before
the specified Pre Rec time may not be recorded
even if recording starts.
0
Immediately after power on
0
Immediately after recording stops
0
Immediately after switching from Media
mode to Camera mode
0
Immediately after setting [Rec Mode]
0
Immediately after the end of Clip Review
0
Immediately after changing file format
0
Immediately after changing video format
Special Recording
79
Sh
ooting
