JVC GY-HM180E, Instructions Manual

Page: 49 / 194

Zoom Operation
Adjusts the angle of view.
Optical zoom ratio: 1x to 12x
Dynamic zoom ratio: 12x to 24x
Set the dynamic zoom “On”/“Off” in [Main Menu]
B
[Camera Function]
B
[Dynamic Zoom].
(
A
P99 [ Dynamic Zoom ] )
Zooming can be operated using any of the three
levers/rings below.
0
Zoom Lever at the Grip
0
Zoom lever at the Handle
O
0
Zoom Ring at the Lens Section
During the zoom operation, the zoom bar or
number will appear on the upper right corner of the
screen.
(
A
P135 [Zoom Display] )
.
Using the Zoom Lever at the Grip
1
Press the zoom lever to zoom.
0
The zoom speed changes according to the
extent the zoom lever is being pushed.
0
Zooms into wide angle and increases the
angle of view when “W” is pressed.
0
Zooms into telephoto and decreases the
angle of view when “T” is pressed.
Using the Zoom Lever at the Handle
O
1 Set the zoom speed individually in [Main
Menu]
B
[Camera Function]
B
[Handle
Zoom Speed L]/[Handle Zoom Speed M]/
[Handle Zoom Speed H].
0
Set the zoom speed for “L”, “M” and “H” of the
[ZOOM L/M/H] zoom speed switch
individually.
Increasing the value increases the zoom
speed.
(
A
P99 [Handle Zoom Speed L/Handle Zoom
Speed M/Handle Zoom Speed H
O
] )
Memo :
0
The zoom lever at the handle is disabled when
“Off” is selected.
2
Set the [ZOOM L/M/H] zoom speed switch
to any of the settings.
3
Press the zoom lever at the handle to zoom.
0
The zoom operation is performed in the
speed that has been set.
Using Zoom Ring at the Lens Section
You can adjust the preferred angle of view by
turning the zoom ring.
Saving/Recalling Current Zoom
Position (Preset Zoom)
This allows you to register up to three zoom
positions.
1
Assign the “Preset Zoom1”, “Preset
Zoom2”, or “Preset Zoom3” function to any
of the user buttons.
(
A
P39 [Assignment of Functions to User
Buttons] )
(
A
P100 [USER1 to USER9, LCD KEY▲/LCD
KEY▶/LCD KEY▼/LCD KEY◀] )
2
Save the current zoom position.
0
Press any of the user buttons assigned with
the “Preset Zoom1”, “Preset Zoom2”, or
“Preset Zoom3” function for more than 1
second.
0
The current zoom position will be stored.
3
Recall the stored zoom position.
0
Press any of the user buttons assigned with
the “Preset Zoom1”, “Preset Zoom2”, or
“Preset Zoom3” function and release within 1
second.
0
The camera recorder zooms to the stored
zoom position.
Memo :
0
The zoom speed to the zoom position can be set
in [Main Menu]
B
[Camera Function]
B
[User
Switch Set]
B
[Preset Zoom Speed].
(
A
P101 [ Preset Zoom Speed ] )
0
Operating other zoom maneuvers during a
zoom position recall will cancel the recall.
50
Zoom Operation
Sh
ooting