JVC GY-HM180E Page 122 Instructions Manual Download

Page: 122 / 194

Stream ID

For setting the registered stream ID of the live

distribution destination.

The default value varies with the product model.

* Enter not more than 63 characters.

Stream Key

Enter the stream key specified at the live

transmission destination.

There is no default value (blank).

* Enter not more than 63 characters.

Password

For setting the [Stream ID] password.

There is no default value (blank).

* Enter not more than 127 characters. Enter not

more than 31 characters for RTSP/RTP setting.

Latency

For setting the latency mode.

[Setting Values: High, Medium,

Low,

Minimun(ZIXI Off)]

Adaptive Bit Rate

If “On” is selected, the bit rate setting value of

live streaming is set to maximum limit, and the

bit rate is changed automatically according to

changes in the network bandwidth.

[Setting Values: On,

Off]

Memo :

[Adaptive Bit Rate] is selectable when [Type] is

set to “ZIXI” and [Latency] is set to a value other

than “Minimun(ZIXI Off)”.

* The bit rate is displayed on the status screen

only when “On” is set.

PCR Jitter

Setting to “Low” reduces to PCR jitter of live

streaming.

[Setting Values: Low,

Normal]

Memo :

This item is selectable only when [Type] is set to

“MPEG2-TS/UDP”.

SMPTE 2022-1 FEC

Set to “On” to use FEC (Forward Error

Correction).

A transmission system that recovers the missing

packets in the decoding process without having

to retransmit the missing packets.

[Setting Values: On,

Off]

* The decoder must be compatible with SMPTE

2022-1.

FEC Matrix

For setting the amount of FEC (Forward Error

Correction) overhead for configuring

SMPTE2022-1.

(

P179 [Setting the FEC Matrix] )

Memo :

This item is selectable only when [SMPTE

2022-1 FEC] is set to “On”.

Resolution

For setting the resolution of the video image during

live distribution.

The available options vary according to the settings

for [

Resolution] and [

Frame Rate] under

[Record Format].

Resolution

Frame

Rate

Setting values

(

: default value)

1920x1080

60p, 30p

1920x1080 (*1),

1280x720, 720x480,

640x360

50p, 25p

1920x1080 (*2),

1280x720, 720x576,

640x360

60i, 30p

1920x1080 (*1),

1280x720, 720x480,

640x360

50i, 25p

1920x1080 (*2),

1280x720, 720x576,

640x360

1280x720

60p

1280x720, 720x480,

640x360

50p

1280x720, 720x576,

640x360

720x480

(U model)

60i

720x480, 640x360

720x576

(E model)

50i

720x576, 640x360

*1 Default value for U model

*2 Default value for E model
Memo :

The setting cannot be changed during live

streaming (Live Streaming set to “On”).

The Aspect Ratio for the live streaming image is

fixed to “16:9”.

Frame Rate

For setting the frame rate of the video image during

live distribution.

The selectable options vary according to the

setting in [Live Streaming Set]

[Resolution].

System Menu

123

Menu

Display and

etailed

etti
ngs

Summary of Contents for GY-HM180E



































































































































































































Search results

Summary of Contents for GY-HM180E

Reviews:

Related manuals for GY-HM180E

Brands by name

Popular brands

JVC GY-HM180E, Instructions Manual

Search results

Summary of Contents for GY-HM180E

Reviews:

Related manuals for GY-HM180E

Brands by name

Popular brands