2-8
4.
7
TENSION ARM ASSY
8
SLANT POLE ARM ASSY
9
TU ARM ASSY
0
SWING ARM ASSY
Fig. 2-4-6
10
9
7
8
(S )
10
11
(P )
8
NOTE
7
NOTE
7
NOTE
8
NOTE
10
NOTE
9
NOTE
7
SPRING
NOTE
7
:
When detaching, remove the spring
of the
@
PAD ARM ASSY in ad-
vance.
Pay attention to the attachment po-
sition.
NOTE
0
:
When detaching, remove the screw
then remove the SWING ARM ASSY
by pulling it up and turning it.
NOTE
9
:
Pay attention to the mounting posi-
tion.
NOTE
8
:
When mounting the SLANT POLE
ARM ASSY, hook the spring onto
the lug as in diagram A, and fit the
combination onto the SLIDE DECK
ASSY. After fitting, hook the spring
onto the lug of the SLIDE DECK
ASSY as in diagram B.
Be careful not to lose the spring.
NOTE
8
SPRING
A
B
NOTE
9
NOTE
10
NOTE
6
:
Perform the following steps for mounting.
1. Align the 2 holes with the pins.
2. Attach the PINCH ROLLER ARM ASSY by aligning the
positions.
3. Attach the SUB DECK
ASSY by aligning the
positions.
4. Check that the parts
below them are lo-
cated in the correct
positions.
5. Tighten the 2 screws.
6. Tighten the screw.
7. Attach the 2 SLIT
WASHER parts.
Fig. 2-4-5
3.
4
REEL DISK ASSY(SUP)
5
REEL DISK ASSY(TU)
6
REEL COVER ASSY
6
4
5
(W )
4
(W )
6
(W )
6
(W )
5
(S
b)
10
6
(S
a)
9
6
(S
a)
8
6
NOTE
4
NOTE
5
NOTE
6
NOTE
,
SUP
WHITE
BLACK
REEL DISK ASSY
TU
4
5
NOTE
6
4
1, 7
2,6
5
3
NOTE
4
:
Be careful not to attach the REEL DISK wrongly. The Sup-
ply side can be identified by the white color at the center.
NOTE
5
:
Be careful not to attach the
REEL DISK wrongly. The
Take-up side can be iden-
tified by the black color at
the center.
