JVC GR-DVM1 Page 15 Instructions Manual Download

Page: 15 / 84

Sun Hood Attachment

The sun hood shields the LCD monitor from reflection so that the user can watch it with ease even under
direct sunlight. It also helps protect the monitor from damage.

LCD monitor

Sun hood

Lens

Sun hood

LCD monitor

ATTACH SUN HOOD

Mount the sun hood on the LCD monitor so
that it opens when you pull

up.

•To detach, pull in the opposite direction of

the arrow.

OPEN SUN HOOD

Pull

up to open the sun hood.

DETACH SUN HOOD

•If detaching is difficult, grasp the sun hood at

the positions marked with a on top and
bottom, and pull toward yourself.

NOTE:

When not using the LCD monitor, detach the sun
hood and close the LCD monitor. The LCD monitor
can not be closed with the sun hood attached.

To use the sun hood when tilting the LCD
monitor upward 180 degrees . . .

..... it is possible to attach the sun hood upside down.

When turning over the LCD monitor, attach the
sun hood upside down.

Mark

To close the sun hood, push

Summary of Contents for GR-DVM1





















































































Search results

Summary of Contents for GR-DVM1

Reviews:

Related manuals for GR-DVM1

Brands by name

Popular brands

JVC GR-DVM1, Instructions Manual

Search results

Summary of Contents for GR-DVM1

Reviews:

Related manuals for GR-DVM1

Brands by name

Popular brands