JVC GR-DVM1 Instructions Manual Download Page 78

Page: 78 / 84

Battery Packs

The supplied battery pack is a
lithium-ion battery. Before using
the supplied battery pack or an
optional battery pack, be sure to
read the following cautions:
1. To avoid hazard . . .

..... do not burn.
..... do not short-circuit the terminals.
..... do not modify or disassemble.
..... do not expose the battery to temperatures

exceeding 60°C, as this may cause the battery to
overheat, explode or catch fire.

..... use only specified chargers.

2. To prevent damage and prolong service life . . .

..... do not subject to unnecessary shock.
..... charge in an environment where temperatures

are within the tolerances shown in the chart
below. This is a chemical reaction type
battery—cooler temperatures impede chemical
reaction, while warmer temperatures can
prevent complete charging.

..... store in a cool, dry place. Extended exposure to

high temperatures will increase natural
discharge and shorten service life.

..... avoid prolonged uncharged storage.
..... remove from charger or powered unit when not

in use, as some machines use current even
when switched off.

3. To prevent damage to the camcorder . . .

..... replace the battery pack when it begins to

deliver less recording time per charge.

NOTE:

It is normal for the battery pack to be warm after
charging, or after use.

Temperature Range Specifications
Charging ...................................... 10°C to 35°C
Operation .................................... 0°C to 40°C
Storage ......................................... –10°C to 30°C

NOTES:

●

Recharging time is based on room temperature of 20°C.

●

The lower the temperature, the longer recharging
takes.

Cassettes

To properly use and store your cassettes, be sure to read
the following cautions:
1. During use . . .

..... make sure the cassette bears the Mini DV mark.
..... be aware that recording onto prerecorded tapes

automatically erases the previously recorded
video and audio signals.

..... make sure the cassette is positioned properly

when inserting.

..... do not load and unload the cassette

repeatedly without allowing the tape to run at
all. This slackens the tape and can result in
damage.

..... do not open the front tape cover. This exposes

the tape to fingerprints and dust.

CAUTIONS

When using the AC Power Adapter/Charger in
areas other than the USA

The provided AC Power Adapter/Charger features
automatic voltage selection in the AC range from
110 V to 240 V.

USING HOUSEHOLD AC PLUG ADAPTER
In case of connecting the unit's power cord to an
AC wall outlet other than American National
Standard C73 series type use an AC plug adapter,
called a "Siemens Plug", as shown.
For this AC plug adapter, consult your nearest JVC
dealer.

INFORMATION
This device complies with Part 15 of FCC Rules.
Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation. Change or modifications not
approved by the party responsible for compliance
could void the user's authority to operate the
equipment. This equipment has been tested and
found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference to
radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct
the interference by one or more of the following
measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment
and receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV
technician for help.

Plug adapter

Terminals