JVC GR-DVM1, Instructions Manual

Page: 60 / 84

60
EDITING
(Cont.)
Random Assemble Editing
Using the RM-V708U remote control, you can use P.AE/Effects and make an original edited tape.
1 MAKE CONNECTIONS
Connect the Docking Station to your VCR and
make sure that the playback picture and sound
are available on the connected TV (
Z
pg. 52).
2
START SOURCE PLAYBACK
First turn the Power Dial to "PLAY". Press PLAY
and then press R.A. EDIT ON/OFF on the
remote control. Make sure to point the remote
control at the Docking Station's sensor.
• The Random Assemble Editing Menu appears
on the TV screen.
• If you're not using a Fade/Wipe at the
Program 1 Edit-In point, go to step 4.
3 EXECUTE FADE/WIPE IN
Press FADE/WIPE.
• Cycle through the effects by pressing
repeatedly, and stop when the one you want
is displayed.
• You can’t use a Picture Wipe/Dissolve at the
beginning of Program 1, or at the end of the
last scene.
T W
Source tape (Camcorder)
To S-VIDEO
input jack
VCR (Recording deck)
Yellow
White
Red
Red
White
Yellow
To AUDIO input jacks (L/R)
To VIDEO input jack
S-VIDEO cable
To remote pause jack
Editing cable
To EDIT jack
New tape (VCR)
To S-VIDEO output jack
To AUDIO output
jacks (L/R)
To VIDEO output jack
AUDIO and
VIDEO cables
Core filter
NOTES:
●
When using a JVC VCR with a remote pause
terminal, connect the editing jack on the Docking
Station to the VCR’s remote pause terminal using
an editing cable.
●
If you use a JVC VCR not equipped with a remote
pause terminal or a non-JVC VCR, connect the
Docking Station's editing jack to the remote
control's remote pause terminal using an editing
cable.
●
If the VCR has an S-Video input terminal, connect
it using an S-Video cable.
●
If the VCR has only one audio input terminal,
connect it using a conversion plug (not provided).
●
When using the provided cable, make sure you
connect the end of the cable with the core filter to
the Docking Station.
To Operate The VCR With The Remote Control . . .
..... press and hold SHIFT, then press the
appropriate control button.
RM-V708U