manualshive.com logo in svg

JVC GR-DVM1, Instructions Manual, Page: 22 / 84

Share
Download
JVC GR-DVM1 Instructions Manual Download Page 22

22

RECORDING

  (Cont.)

Holding The Camcorder

1

GRASP CAMCORDER

Grasp the camcorder with the pinkie finger
positioned under the bottom of the camcorder.

•Be sure to use the provided hand strap.
•The grip is also recommended.

2

OPEN LCD MONITOR

Hold the camcorder with both hands for stable
shooting.

•Be careful not to push the LCD monitor or

the buttons you do not wish to use.

REC

9 0min

89 min

3 min

2 min

blinking

1 min

blinking

0 min

blinking

Tape Remaining Indicator

The time remaining on the tape is automatically
monitored and displayed in the LCD monitor
(

Z

 pg. 74). When the tape ends, “TAPE END”

appears in the LCD monitor. If the LCD monitor
indications are turned off (

Z

 pg. 23), the tape

remaining indicator appears when remaining time
reaches 2 minutes.

What Happens When You Shoot Sideways

If the camcorder is held horizon-
tally (on its side) while shooting,
the recorded/played-back image
also appears on its side.

Summary of Contents for GR-DVM1





















































































Reviews:

No comments