JVC GR-DVM1, Instructions Manual

Page: 8 / 84

8
Charging The Battery Pack
You can charge one battery pack at a time, or two consecutively.
GETTING STARTED
1 SUPPLY POWER TO CHARGER
Plug the AC Adapter/Charger's power cord in
to an AC outlet. The power indicator comes
on.
2
ATTACH BATTERY/BATTERIES
Make sure the + – marks are facing down and
aligned with the corresponding marks on the
AC Power Adapter/Charger.
• The Charge Indicator (1 or 2) begins blinking
to indicate charging has started.
3 CONFIRM STATUS
When the charger indicator stops blinking but
stays lit, charging is finished.
• If two batteries are attached to the charger,
they will be charged in the order that they
were attached.
ATTACH
BLACK
RED
Charge marker
• The charge marker does not move by itself. After
charging or removing a discharged battery, be sure to
set the marker to the predetermined position.
DETACH
4 DETACH BATTERY/BATTERIES
Slide the battery or batteries in the direction of
the arrow and lift off.
•Remember to unplug the AC Adapter/
Charger's power cord from an AC outlet.
Charger indicator 1
Power lamp
Charger indicator 2
DC jack
AC Power Adapter/
Charger AA-V80U
Power cord
Battery pack BN-V812U
BATTERY ONE TWO
BN-V812U approx. 100 min. approx. 200 min.
CHARGING TIME
Charge Marker
The charge marker makes it easy for you to
differentiate between charged and discharged
batteries. Choose RED or BLACK to mean charged
or discharged, and you'll always know the status of
your batteries.