Masterpage:Right+
EN
79
Filename [MV5SEK_13Subsidiary.fm]
SUBSIDIARY SETTINGS
Page 79Wednesday, 31 August 2005 19:58
RECORDING SET
8
SAVE AS LIBRARY
— OFF /
ON
When this function is set to “ON”, the recording information is
automatically stored in the library. For details, refer to “Modify
Library Information” (
墌
pg. 71).
8
XP MODE REC AUDIO
—
DOLBY DIGITAL
/ LINEAR PCM
You can select the audio format when you record a title in XP
mode. When this function is set to “LINEAR PCM”, you can obtain
a high-quality audio sound.
DOLBY DIGITAL
: To record in Dolby Digital format.
LINEAR PCM
: To record in Linear PCM format.
8
AUDIO REC
—
NICAM 1/MAIN
/ NICAM 2/SUB / MONO
You can select the desired NICAM audio channel to be recorded
on a DVD-R/RW (Video mode) disc.
NICAM 1/MAIN
: To record the main language of NICAM audio.
NICAM 2/SUB
: To record the sub language of NICAM audio.
MONO
: To record the standard (monaural) sound of NICAM audio.
NOTE:
This function works only for the NICAM bilingual programme.
8
DIRECT REC
—
OFF
/ ON
When this function is set to “ON”, you can easily start recording the
programme that you are watching on your TV. Press and hold
7
and press
4
on the remote control, or press
7
on the unit.
NOTES:
●
When you use the Direct Rec function, be sure to use a TV offering
T-V LINK, etc. and connect a fully-wired 21-pin SCART cable
between the unit and the TV. (
墌
pg. 15)
●
If “DIRECT REC” is set to “OFF”, the
7
button functions as described
in “Basic Recording (DVD)” (
墌
pg. 26) or “Basic Recording (VHS)”
(
墌
pg. 28).
●
During Direct Rec, “– –” appears on the front display panel.
●
If a programme is recorded with the Direct Rec, the station name will
not be registered in the library. “– – – –” will be displayed for the
station name.
●
Even if there is no power supply for more than 60 minutes, the unit
keeps the setting.
DISPLAY SET
8
SUPERIMPOSE
— OFF /
AUTO
When this function is set to “AUTO”, various operational indicators
appear on the TV screen.
OFF
: To turn off superimposed indications.
AUTO
: To superimpose operational indications for approximately
five seconds just after the corresponding operation.
NOTES:
●
Even when “SUPERIMPOSE” is set to “OFF”, you can display the
various operational indicators by pressing
ON SCREEN
. To clear the
operational indicators, press
ON SCREEN
again.
●
When you use this unit as the source player for editing, be sure to set
“SUPERIMPOSE” to “OFF” before starting.
●
When you select “AUTO”, during playback, the operation mode
indicators may be disturbed depending on the type of disc being
used.
8
GREY/BLUE BACK
— OFF /
ON
When this function is set to “ON”, the TV screen becomes all grey
(DVD deck)/blue (VHS deck) when receiving a channel not in use.
NOTE:
When you want to receive an unstable channel with poor signals, set
this function to “OFF”.
8
DIMMER
—
BRIGHT
/ DIMMED1 / DIMMED2 / OFF
You can change the brightness of the front display panel.
BRIGHT
: To turn on the light on the front display panel. (Blue lamp
on the front display panel is turned on.)
DIMMED1/DIMMED2
: To change the brightness level. (Blue lamp
on the front display panel is turned off.)
OFF
: To turn off the light on the front display panel. (Blue lamp on
the front display panel is turned off.)
8
POWER SAVE
—
OFF
/ ON
When this function is set to “ON”, you can reduce the power
consumption while the unit is turned off.
●
During Power Save mode —
— the front display panel will be turned off.
— the Just Clock function (
墌
pg. 88) does not work.
●
Power Save does not work when —
— the unit is in the Timer mode.
— the unit’s power is turned off after timer-recording or Instant Timer
Recording.
— “L-2 SELECT” is set to “DECODER” or “SAT VIDEO/RGB”. (
墌
pg. 45)
●
It takes some time for the unit to complete initialisation after you turn
on the unit power, with “HELLO” blinking on the front display panel.
MV5SEK_00.book Page 79 Wednesday, August 31, 2005 7:58 PM
