background image

Filename [MV5SEK_04DiscInfo.fm]

Masterpage:Left0

6

 

EN

Page 6

Wednesday, 31 August 2005  19:58

DISC INFORMATION

Recordable/Playable Discs

You can use discs with the following logos for recording and 
playback.

The above table is based on the information as of April 2005.

Recording and playback may not be performed depending on the 
characteristics and condition of the disc used, leading to 
unsatisfactory results. Using discs manufactured by JVC is 
recommended since they have been tested to be compatible with this 
unit.

DVD-RAM Discs

It is only possible to use discs which conform with DVD-RAM 
standard Version 2.0 or 2.1.

It is impossible to record on DVD-RAM discs which do not conform to 
this standard. If you use a disc formatted under a different standard 
version, format it on this unit before use.

It may not be possible to record, play back, edit or dub a DVD-RAM 
disc even if it conforms to the standard if it was recorded or edited on 
the devices from other manufacturers or on a PC, or if it has far too 
many titles, or if there is very little available capacity remaining on the 
disc.

DVD-RAM discs recorded on this unit cannot be played back on an 
incompatible DVD player.

It is possible to record copy-once programmes of digital broadcasts 
only onto 4.7/9.4 GB DVD-RAM discs (2.8 GB DVD-RAM discs are 
not compatible).

DVD-R/RW Discs

It is only possible to use DVD-R discs which conform with DVD-R 
standard Version 2.0.
When a DVD-R/RW disc (Video mode) is finalised (

pg. 90), it 

can be played back on a standard DVD player as a DVD VIDEO 
disc.
When a DVD-RW disc (VR mode) is finalised (

pg. 90), it can be 

played back on a standard DVD player compatible with the VR 
mode of DVD-RW discs.

Before finalising —

— it is possible to record on unrecorded areas of the disc, edit the 
disc title and programme titles, and delete programmes.

It is impossible to record or edit DVD-R/RW discs recorded on other 
devices even if they have not been finalised.

It is impossible to overwrite recorded areas of DVD-R discs.

Available recording capacity does not increase even if a recorded 
programme is deleted from a DVD-R disc.

After finalising  —

After a DVD-R/RW disc (Video mode) has been finalised, it is 
possible to play back the recorded programmes (video and/or 
audio) on a standard DVD video player as a DVD VIDEO disc.

Edited titles are displayed as the 
“DVD menu” in video mode.

It is impossible to record, edit or 
delete the data either in video 
mode or in VR mode.

Either in video mode or in VR 
mode, although the disc can be 
played back on DVD players from 
other manufacturers, sometimes it 
may not be possible to play back 
depending on the disc and recording conditions.

It is impossible to record on CD-R/RW or DVD-R discs used for 
authoring.

It is impossible to record onto DVD-R/RW (Video mode) discs 
broadcasts that allow you to copy once. The copy-once programmes 
can only be recorded onto DVD-RW discs formatted in VR mode.

NOTE:

The following may result if you play back a DVD-R disc recorded on 
another unit.

The disc does not play.

A mosaic pattern (block noise) appears on the screen.

Video or audio may be dropped out.

The unit stops during playback.

Discs For Playback Only

You can use discs with the following logos for playback only.

Playback may not be performed depending on the characteristics and 
condition of the disc used.

DTS Audio CDs can also be played back (An optional DTS decoder is 
required).

MP3 and JPEG discs can be played back on this unit only when they 
have been recorded in the ISO9660 or Joliet format and finalised.

JPEG files that can be played back on this unit must conform to JFIF/
Baseline process, and the maximum resolution of a JPEG file is 
2,812 x 2,112 pixels.

CD-R/RW discs recorded in music CD format need to be finalised to 
play back on this unit.

Operation and audio quality of this unit are not guaranteed for discs 
that do not conform to the Compact Disc specification (CD-DA).
Before you play back a CD, check for the CD logo and read the notes 
on the package to confirm that it conforms to the Compact Disc 
specification.

Depending on the intentions of the author of the software, recording 
conditions of DVD discs and Video CD discs may be restricted. Since 
this unit plays back discs according to the intentions of the author of 
the software as indicated on the disc, some functions may not 
operate as commanded.

When switching from the first layer to the second layer of double-
layered DVD VIDEO discs, the image and sound may be momentarily 
distorted. This is not a malfunction.

About Discs

DVD-RAM

12 cm: 4.7 GB/9.4 GB
8 cm: 1.4 GB/2.8 GB
Ver. 2.0/2x speed
Ver. 2.1/1x – 2x speed

DVD-RW

12 cm: 4.7 GB/9.4 GB
Ver. 1.1/1x – 2x speed (Video mode/VR mode)

DVD-R

12 cm: 4.7 GB
8 cm: 1.4 GB
Ver. 2.0/1x – 4x speed (Video mode)

DVD VIDEO

Video CD/Super Video CD

Audio CD

CD-DA files

CD-R

CD-DA/JPEG/
MP3 files

CD-RW

CD-DA/JPEG/
MP3 files

CD-ROM

JPEG/MP3 files

(example of region code 
indications)

MV5SEK_00.book  Page 6  Wednesday, August 31, 2005  7:58 PM

Summary of Contents for DR-MV5BEK





































































































Reviews: