JVC CA-EX70 Instructions Manual Download Page 22

Page: 22 / 51

CA-EX70

Selecting a Source

Select the input source to be played.

From the front panel

Press INPUT repeatedly.

The name of the selected source appears in the display.
Each press of INPUT switches the input source as shown
below.

•

When the TUNER source is selected, the display shows
the frequency of the last received radio station.

One touch operation

When the unit is in the STANDBY mode, press INPUT to
automatically turn the power on and switch to the last
source you listened to.

From the remote control

Press AUX, TUNER, CD, or TAPE.

The respective input source is selected.
Press TUNER repeatedly to select the band (FM or AM).

One touch operation

When the power is in the STANDBY mode, press AUX,
TUNER, CD, or TAPE to automatically turn the power on
and switch to the selected source.

When using other optional components together with
this unit via the Compu Link connection (page 40)

When a source is selected, the selected source component
switches ON automatically. If the component is ready for
playback, it also starts to play (see page 41).

Example) This indicator lights when MD is selected

Source indicators

INPUT

AUX

TUNER

TAPE

TUNER (FM/AM)

AUX

TAPE

TUNER

AUX

EN01-22.CA-EX70[J]/1-5/21

98.6.8, 9:32 AM

Summary of Contents for CA-EX70




















































Search results

Summary of Contents for CA-EX70

Reviews:

Related manuals for CA-EX70

Brands by name

Popular brands

JVC CA-EX70, Instructions Manual

Search results

Summary of Contents for CA-EX70

Reviews:

Related manuals for CA-EX70

Brands by name

Popular brands