JVC CA-EX70 Instructions Manual Download Page 48

Page: 48 / 51

CA-EX70

SYMPTOM

CD player

Playback is not possible.

Sound is intermittent.

No sound.

Disc tray does not open.

CD player does not respond.

ACTION

•

Load a disc (see page 27).

•

Load the disc so that the
label side faces up in the
disc tray.

•

Load the disc so that it lies
flat in the disc tray (see
page 27).

•

Press

‹

•

Load a different disc.

•

Leave the unit turned on
until the moisture
evaporates.

•

Wipe the surface disc with
a soft cloth.

•

Replace the disc with a
new one.

•

Check to make sure the all
equipment is connected
correctly.

•

Adjust the volume on the
amplifier/tuner.

•

Connect the power cord.

•

Turn the power on.

•

Connect the power cord.

•

Connect the Compu Link
cable.

•

Turn the power on.

POSSIBLE CAUSE

•

No disc has been loaded.

•

The disc was inserted
upside-down.

•

The disc is not flat in the
groove on the disc tray

•

The playback is paused.

•

The disc is damaged.

•

Moisture has condensed
inside the unit.

•

The disc is dirty.

•

The disc is warped or
scratched.

•

Connections are incorrect
or incomplete.

•

Volume control on amplifier

/tuner is turned all the way

down.

•

Power cord is not
connected.

•

Power is not turned on.

•

The power cord is
disconnected.

•

The Compu Link cable is
not connected.

•

Power is not turned on.

EN40-52.CA-EX70[J]/1-5/21

98.6.9, 9:31 AM

Summary of Contents for CA-EX70




















































Search results

Summary of Contents for CA-EX70

Reviews:

Related manuals for CA-EX70

Brands by name

Popular brands

JVC CA-EX70, Instructions Manual

Search results

Summary of Contents for CA-EX70

Reviews:

Related manuals for CA-EX70

Brands by name

Popular brands