JVC CA-EX70, Instructions Manual

Page: 35 / 51

35
CA-EX70
Daily Timer
Use the remote control to set this timer. It can be set during either power ON or STANDBY.
Be sure to set the clock before attempting this operation.
1
Press CLOCK/TIMER to display “DAILY”.
2
Press CLOCK/TIMER again.
“ON” appears in the display.
3
Set the start time (ON).
1
Set the hour.
Use +/R or –/L to display the appropriate hour, then
press SET.
Hold down +/R or –/L to change the hour sequentially.
2
Set the minutes.
Use +/R or –/L to display the appropriate minute, then
press SET.
Hold down +/R or –/L to change the minutes in 10
minutes steps.
4
Set the end time (OFF).
Set the end time (OFF ) in the same way you set the
start time (ON).
5
Select the source to be played when the timer
activates.
Press +/R or –/L repeatedly to select the source, then
press SET.
Each time +/R or –/L is pressed, the source switches as
follows.
When selecting TUNER
Press +/R or –/L repeatedly to select desired preset
channel, then press SET.
When selecting MD
Press +/R or –/L repeatedly to select desired track
number, then press SET.
• You can select any track number from 1 to 20.
• Pressing SET without selecting a track starts playback
from the first track of the MD.
Blinks
Blinks
Blinks
Blinks
After setting the minutes (before pressing SET)
Blinks
CLOCK
/ TIMER
–
/ L
+
/ R
SET
– / L
+
/ R
SET
DAILY
TUNER MD CD TAPE
After setting the minutes (before pressing SET)
EN27-39.CA-EX70[J]/1 98.6.8, 9:58 AM 35