JVC CA-EX70, Instructions Manual

Page: 27 / 51

27
CA-EX70
Loading CDs
The CD player’s unique 3 disc changer mechanism houses 3 individual disc trays inside the main tray.
1
Press
0
(open) for the disc tray (CD 1to 3) you
want to load.
The main tray opens to the selected disc tray.
The disc tray number and “OPEN” appear in the display.
• The disc trays housed in the main tray are numbered
CD 1, CD 2, and CD 3 starting from the bottom tray.
One touch operation
When the unit is in the STANDBY mode, press one
0
to
automatically turn the power on and open to the
selected tray.
2
Place a CD with the label side facing up.
Place CD singles (8 cm) in the depressed inner circle.
3
Press the same
0
you pressed in step
1
.
The main tray closes.
The disc tray number and “CLOSE” appear in the
display.
• Repeat steps
1
to
3
to load up to 3 CDs.
Displayed information
When a CD is loaded, the disc number for that CD is displayed and the player reads the disc’s data.
After the data is read, the display shows the total number of tracks and total playing time of the disc,
then switches to show the playing time for the first track.
Likewise, when playback is stopped, the display shows the total number of tracks and total playing
time of the current disc for 4 seconds, then it shows the playing time for track 1.
Tip
When loading more than one CD, instead of closing the main tray, press
0
for the next tray you want
to load, the main tray automatically closes and then reopens to selected disc tray.
CAUTION
The disc tray will close if pushed inward. Be careful not to push the tray inward when placing a CD.
CD Operations
Example) When CD1
0
is pressed
Example) When CD 1
0
is pressed
Reading data
Total number of tracks and total
playing time (shown for 4 seconds)
Playing time for track 1
CD 3
CD 2
CD 1
DISC
DISC
DISC
EN27-39.CA-EX70[J]/1 98.6.8, 9:57 AM 27