JVC CA-EX70 Instructions Manual Download Page 33

Page: 33 / 51

CA-EX70

REPEAT 1 CD

REPEAT ALL

REPEAT 1

Repeat Play Mode

This play mode lets you repeat the current track, the current CD, or all the tracks on all the CDs.

Press REPEAT repeatedly to select the repeat
mode.

Each time you press REPEAT, the repeat modes switch
as follows:

REPEAT ALL

Repeats all the tracks on all CDs.
This mode can be selected in any play mode.

REPEAT 1 CD

Repeats all the tracks on the current CD.
This mode can only be selected during the normal
(continuous) play mode.

REPEAT 1

Repeats the current track.
This mode can be selected in any play mode.

Press

‹

to start repeat playback.

Note:

The repeat mode can also be selected while

playing

To cancel repeat playback

Press REPEAT repeatedly to turn off the REPEAT indicator.

Tray Lock

This function electronically locks the main tray so that it can not be opened simply by pressing one of
the

buttons.

Set the power to the STANDBY mode.

If the power is presently ON, press POWER.

Press

for CD 1 while holding down

CANCEL.

“LOCKED” appears in the display and the main tray is
locked.

• When the main tray is locked, the display shows

“LOCKED” and the main tray cannot be opened.

• When a

is pressed, “LOCKED” appears in the

display and the unit remains in the STANDBY mode.

To unlock the tray

Repeat steps

and

above.

“UNLOCKED” appears in the display and the main tray is
unlocked.
•

Pressing a

opens the selected tray.

•

When a

is pressed during the STANDBY mode, the

power is turned on and the selected tray opens
automatically.

Off (mode cancelled)

REPEAT

/CANCEL

CD 1

/CANCEL

EN27-39.CA-EX70[J]/1

98.6.8, 9:58 AM

Summary of Contents for CA-EX70




















































Search results

Summary of Contents for CA-EX70

Reviews:

Related manuals for CA-EX70

Brands by name

Popular brands

JVC CA-EX70, Instructions Manual

Search results

Summary of Contents for CA-EX70

Reviews:

Related manuals for CA-EX70

Brands by name

Popular brands