E-86
Setup Menu
DISC MENU Screen
The following table identifies and describes the parameters that may be set using the DISC MENU screen.
Top half
: Appearance on monitor screen
Bottom half : Appearance on LCD display
[ ]
: Default setting
Parameter
Possible settings
Description
FINALIZE
[CANCEL]
EXECUTE
FINAL
[CAN]
EXE
CANCEL DISC
[CANCEL]
FINALIZATION
EXECUTE
CAN FIN
[CAN]
EXE
DISC ERASE
[CANCEL]
(QUICK)
EXECUTE
q ERASE
[CAN]
EXE
DISC ERASE
[CANCEL]
(FULL)
EXECUTE
F ERASE
[CAN]
EXE
MENU
This parameter indicates whether or not the recorded disc is to be finalized. If a disc
recorded using this DVD recorder is to be played on a DVD player, it must first be
finalized. Once finalizing has been carried out, no addition recordings can be made
on the disc.
CANCEL
: Finalizing is not to be carried out.
EXECUTE
: Finalizing is to be carried out.
It will be necessary to close all titles on a disc before it can be finalized.
* A maximum of 20 minutes will be required to complete finalizing.
Select whether to cancel the finalization of a finalized DVD-RW. To add a recording
to a finalized DVD-RW set to EXECUTE. A DVD-RW finalized on another machine
cannot be canceled.
CANCEL
: Do not cancel the finalization.
EXECUTE
: Cancel the finalization. The TOP MENU created during finalization is
deleted.
Select whether to do a quick erase on a DVD-RW (video mode). A quick erase only
deletes the DVD-RW disc control area. The time required is shorter than a full erase,
and the disc data is deleted.
CANCEL
: Do not do a quick erase.
EXECUTE
: Do a quick erase. The disc can be newly recorded from the beginning.
Select whether to carry out a full erase on a DVD-RW (video mode). All areas of a
DVD-RW disc are deleted. If a disc is to be used repeatedly delete using this item.
CANCEL
: Do not do a full erase.
EXECUTE
: Do a full erase. The disc can be newly recorded from the beginning.
This button is used to return to the Setup Menu screen.
INPUT SELECT MENU Screen
The following table identifies and describes the parameters that may be set using the INPUT SELECT MENU screen.
Top half
: Appearance on monitor screen
Bottom half : Appearance on LCD display
[ ]
: Default setting
Parameter
Possible settings
Description
INPUT SELECT
[LINE]
Y/C
DV
INPUT
[LINE]
YC
dV
MENU
This parameter is used to select the audio and video input signals.
LINE
: The composite video signal from the VIDEO LINE IN terminal and the analog
audio signals from the AUDIO IN terminals are to be used.
Y/C
: The YC separate signal from the Y/C IN terminal and the analog audio signals
from the AUDIO IN terminals are to be used.
DV
: The digital video and audio signals from the DV IN/OUT terminal are to be
used.
* The front-panel indicator corresponding to the type of input signal selected on this
screen will light up or start to flash.
Setting of this parameter will not be possible when REMOTE SELECT from the
REMOTE MENU screen has been set to DV(MASTER), DV(SLAVE), or
DV(TRIGGER). DV signals will be used for input at these times
This button is used to return to the Setup Menu screen.
