VOICE MAIL SETUP
25
Message Notification:
Sequence of characters that corresponds to the selected PBX, so that the unit
informs the PBX of the existence of new messages.
Message De-notification:
Sequence of characters that corresponds to the selected PBX, so that the unit
informs the PBX that there are no new messages.
Note:
These sequences are PBX functions, and are created in the following manner:
Prefix-Extension Number (Suffix).
The ‘E’ character in the sequence corresponds to the mailbox number which will
be replaced by the relevant extension.
The PBX carries out the notification/de-notification of new messages in several
different ways:
-
Pilot light on the extension.
-
Change of dialing tone.
-
Message on the telephone’s display.
-
...
The next two parameters ‘Alternative Message Notification’ and ‘Alternative
Message De-notification’, correspond to the ‘DTMF2’ selection for the voice mail
‘Extension Notification’ parameter.
Some PBXs use two different sequences, one for example, for proprietary
extensions and the other for analog extensions.
Alternative Message Notification:
Alternative sequence of characters that corresponds to the selected PBX, so
that the unit informs the PBX of the existence of new messages for an
extension.
Alternative Message De-notification:
Alternative sequence of characters that corresponds to the selected PBX, so
that the unit informs the PBX that there are no new messages.
4.3.3 System Parameters I
Click “System Settings I” and the following screen will appear.
