Jura ENA Micro 9 One Touch, Instructions For Use Manual

Page: 17 / 136

17
3 Daily operation
pt
es
nl
it
fr
ru
en
de
Hot water
J
CAUTION
There is a danger of scalding from hot water
splashes.
T
Avoid direct contact with the skin.
Precondition:
READY
is displayed.
T Place a cup under the hot-water spout.
m T Press the Hot Water button.
WATER
, the preset amount of water flows
into the cup.
Preparation stops automatically.
READY
3 Daily operation
Switching on the machine
Daily maintenance of the machine and hygiene
when handling milk, coffee and water are key to a
perfect coffee result in the cup every time.
You should therefore change the water
daily.
T Place a receptacle under the dual spout.
Q T Press the On/Off button to switch the
machine on.
HEATING
RINSING
, the system rinses itself.
The operation stops automatically.
READY
Daily maintenance
To ensure that you get many years of reliable
service out of your ENA and to guarantee the
optimum coffee quality, the machine requires
daily maintenance.
T Remove the drip tray.
T Empty the coffee grounds container and
drip tray and rinse with warm water.
T Reinsert the coffee grounds container and
the drip tray.
T Rinse the water tank with clean water.
T Dismantle and rinse the dual spout (see
Chapter 5 ‘Maintenance – Dismantling and
rinsing the dual spout’).
T Wipe the surface of the machine with a
clean, soft, damp cloth (e.g. microfiber
cloth).
E In the interests of hygiene, we recommend
changing the milk pipe on a regular basis
(approx. every 6 months). Replacement
pipes are available from specialised dealers.
Switching off the machine
When the ENA is switched off, the system is
automatically rinsed if a specialty coffee has been
prepared. If cappuccino or latte macchiato has
been prepared, cappuccino frother rinsing also
takes place.
T Place a receptacle under the dual spout.
Q T Press the On/Off button.
RINSING
,
CAPPUCCINO
RINSING
, the system rinses itself. The
operation stops automatically. Your ENA is
switched off.
E When the ENA is switched off with the
On/Off button, the machine does
not
consume standby energy.