Jura ENA Micro 9 One Touch, Instructions For Use Manual

Page: 20 / 136

20
4 Permanent settings in programming mode
k T Press the Rotary Switch to exit programming
mode.
READY
Rinses
In the program item
RINSES
you can make the
following settings:
U
INIT RINSE MANUAL
U
The switch-on rinse must be started
manually.
U
INIT RINSE AUTOMATIC
U
The switch-on rinse is started automatically.
U
C-RINSE AFTER 10'
U
You are prompted to perform a cappuccino
rinse 10 minutes after preparation of a
specialty coffee with milk.
U
C-RINSE NOW
U
You are prompted to perform a cappuccino
rinse immediately after preparation of a
specialty coffee with milk.
Example: Change the setting such that cappuccino
frother rinsing is performed immediately after
preparation of a specialty coffee with milk.
Precondition:
READY
is displayed.
k T
Press
and hold
the Rotary Switch until
RINSE
appears.
g T Turn the Rotary Switch until
RINSES
is
displayed.
k T Press the Rotary Switch to enter the
program item.
INIT RINSE
g T
Turn the Rotary Switch until
C-RINSE
is
displayed.
k T Press the Rotary Switch to enter the
program item.
AFTER 10'
g T Turn the Rotary Switch until
NOW
is
displayed.
k T Press the Rotary Switch to confirm the
setting.
OK
C-RINSE
g T Turn the Rotary Switch until
EXIT
is
displayed.
k T Press the Rotary Switch to exit the program
item.
RINSES
g T Turn the Rotary Switch until
EXIT
is
displayed.
k T
Press the Rotary Switch to exit programming
mode.
READY
Unit for amount of water
The water volume is given as standard in
OZ
. You
can change this setting to
ML
in programming
mode.
Example: Change the unit for the amount of water
from
OZ
to
ML
.
Precondition:
READY
is displayed.
k T Press and hold the Rotary Switch until
RINSE
appears.
g T Turn the Rotary Switch until
DISPLAY
is
displayed.
k T Press the Rotary Switch to enter the
program item.
OZ
g T Turn the Rotary Switch until
ML
is displayed.
k T
Press the Rotary Switch to confirm the
setting.
OK
, the unit for the amount of water is set.
DISPLAY
g T Turn the Rotary Switch until
EXIT
is
displayed.
k T Press the Rotary Switch to exit programming
mode.
READY