Jura ENA Micro 9 One Touch, Instructions For Use Manual

Page: 23 / 136

23
5 Maintenance
pt
es
nl
it
fr
ru
en
de
c T Press the Maintenance button.
CLEANING
, the milk system and the pipe
are cleaned.
The operation is interrupted,
WATER FOR
CAPPUCCINO
.
T
Rinse the receptacle thoroughly, fill it with
8.5 oz (250 ml) of fresh water and immerse
the milk pipe in it.
T
Empty the receptacle under the dual spout
and place it back underneath.
c T Press the Maintenance button.
CLEANING
, the milk system and the pipe
are rinsed with fresh water.
The operation stops automatically.
READY
Dismantling and rinsing the dual spout
The dual spout must be dismantled and rinsed
daily if milk has been prepared to make sure it
functions perfectly and also in the interests of
hygiene. Your ENA will not prompt you to clean the
dual spout.
T Remove the milk pipe and rinse thoroughly
under running water.
T
Press the releasing devices and pull the dual
spout down and off.
T
Push the milk system down and remove it.
T Dismantle the milk system into its individual
parts.
T Rinse all parts under running water. If there
are severely dried on milk residues, firstly
immerse the individual parts in JURA
Cappuccino Cleaner and then clean them
thoroughly.
T
Fit the air intake pipe.
T
Reassemble the milk system, noting the
numbering on the parts.
T Insert the assembled individual parts into
the dual spout and press them together.
1
2
3