Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INTRUSION DETECTION PREVENTION DEVICES GUIDE REV 01, Manual

Page: 79 / 104

Figure 40: Web Interface Access
Maintaining NSMXpress Series II
The Maintaining section of the NSMXpress Series II navigation tree allows you to perform
the tasks described in the following sections:
• Viewing System Statistics on page 59
•
Upgrading the Recovery Partition on page 60
Viewing System Statistics
To view system statistics, select System Administration > Maintenance > System
Statistics . The system Statistics window appears as shown in Figure 41 on page 59.
Figure 41: System Statistics
CPU
Select CPU to view graphs that monitor the CPU activity hourly, daily, weekly, monthly,
or on a customizable basis.
Log Rate
Select lograte to view graphs that monitor the log rate hourly, daily, weekly, monthly, or
on a customizable basis.
CPU Load
Select Load to view graphs that monitor the CPU load hourly, daily, weekly, monthly, or
on a customizable basis.
59 Copyright © 2010, Juniper Networks, Inc.
Chapter 3: Configuring NSM from the Web Interface