Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INTRUSION DETECTION PREVENTION DEVICES GUIDE REV 01, Manual

Page: 75 / 104

•
Install a new NSMXpress Series II version.
• Add or modify proxy settings for the Yum server.
Managing Users
The NSMXpress Series II WebUI allows you to create multiple users with role-based
access control to the WebUI. You can create a user in the WebUI and associate the user
to a predefined user profile. You can also map a user created in the NSMXpress Series II
OS to a predefined user profile in the WebUI. However, this user profile is only applicable
to the local OS user in the WebUI.
NOTE: You need System Administration permission to create users.
This topic contains the following sections:
• Creating New NSMXpress Series II Users on page 55
•
Deleting a User on page 56
•
Editing User Attributes on page 57
• Understanding User Profiles on page 57
Creating New NSMXpress Series II Users
To create a local OS user:
1.
Select
System Administration > User Management
. The NSMXpress Users dialog box
appears listing all NSMXpress users. See Figure 37 on page 55.
Figure 37: NSMXpress Users Dialog Box
2.
Click
Create a new NSMXpress User.
The Create NSMXpress user dialog box appears.
See Figure 38 on page 56.
55 Copyright © 2010, Juniper Networks, Inc.
Chapter 3: Configuring NSM from the Web Interface