Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INTRUSION DETECTION PREVENTION DEVICES GUIDE REV 01, Manual

Page: 57 / 104

7.
Use the
SRS DB Owner Password
option to enter the SRS database password. The
password requires a minimum of eight characters and is case-sensitive. Reenter the
password in the second text box.
8.
Click Submit to save the options and return to the NSM Configuration Main Menu.
Installing NSM Software
After you submit all your configuration options, click Install to install the NSM software
on your NSMXpress Series II appliance. Installation takes a few minutes. A status indicator
shows the progress of the installation. Wait until installation is finished before continuing
to use the Web interface.
Managing NSM Administration
Expand NSM Administration in the left navigation tree to access the options described
in this section. These options are available only after installing NSM.
The following sections explain how to use each of the NSM Administration options:
• Changing the Superuser Password on page 37
• Downloading NSM MIBS (Regional Server Only) on page 38
•
Exporting Audit Logs on page 38
•
Exporting Device Logs (Regional Server Only) on page 38
• Generating Reports (Regional Server Only) on page 39
• Modifying NSM Configuration Files on page 39
•
Backing Up the NSM Database on page 40
•
Changing the NSM Management IP on page 41
• Scheduling Security Updates on page 41
Changing the Superuser Password
To change the superuser password, select NSM Administration > NSM Super User
Password . See Figure 14 on page 37.
Figure 14: Change Superuser Password
37 Copyright © 2010, Juniper Networks, Inc.
Chapter 3: Configuring NSM from the Web Interface