Juniper IP SERVICES - CONFIGURATION GUIDE V 11.1.X, Configuration Manual

Page: 39 / 366

■
Use the no version to delete the match clause from a route map.
■
See match metric-type.
match policy-list
■
Use to reference a policy list that has the specified name.
■
Example
host1(config-route-map)# match policy-list list1
■
Use the no version to remove the match clause from a route map.
■
See match policy-list.
match route-type
■
Use to match a route for the specified route type.
■
Example
host1(config-route-map)# match route-type level-1
■
Use the no version to delete the match clause from a route map or a specified
value from the match clause.
■
See match route-type.
match-set summary prefix-tree
■
Use to specify the prefix tree that summarizes routes for a particular route map.
■
Use the ip prefix-tree command to set the conditions of the prefix tree, including
which routes to summarize and how many bits of the network address to
preserve.
■
Example
host1(config-route-map)# match-set summary prefix-tree boston
■
Use the no version to disable the use of the prefix tree by the route map.
■
See match-set summary prefix-tree.
match tag
■
Use to match the tag value of the destination routing protocol.
■
Example
host1(config)# route-map 1
host1(config-route-map)# match tag 25
■
Use the no version to delete the match clause from a route map or a specified
value from the match clause.
■
See match tag.
route-map
Route Maps
■ 13
Chapter 1: Configuring Routing Policy