Juniper IP SERVICES - CONFIGURATION GUIDE V 11.1.X, Configuration Manual

Page: 115 / 366

host1# show license nat
Nat license is nat_license
■
See show license.
Displaying Translation Statistics
The show ip nat statistics command displays internal statistics that apply to NAT
operation.
show ip nat statistics
■
Use to display internal NAT statistics.
■
Field descriptions
■
Last dynamic allocation failure—Completion level of any dynamic allocation
failures; the number of times the router attempted dynamic allocation but
reached the dynamic allocation entry limit
■
Current static translation entries
■
Inside Source Simple—Number of inside source simple static translations
■
Outside Source Simple—Number of outside source simple static
translations
■
Inside Source Extended—Number of inside source extended static
translations
■
Outside Source Extended—Number of outside source extended static
translations
■
Dynamic Translation Type—Type of dynamic translation (inside source
simple, outside source simple, inside source extended )
■
Current—Current number of dynamic translations of the associated
translation type
■
Peak—Peak number of dynamic translations of the associated translation
type
■
Accumulated—Accumulated number of dynamic translations of the associated
type; this value reflects the accumulation of dynamic translations since the
last router reboot operation
■
Failed—Total number of installation attempts that failed for an associated
translation type
■
Forwarding statistics for packets received on inside or outside interfaces
■
forwarded directly—Number of packets forwarded directly (that is,
without the need of translation)
■
forwarded through translator—Number of packets forwarded through
the NAT translator
Monitoring NAT
■ 89
Chapter 2: Configuring NAT