Juniper IP SERVICES - CONFIGURATION GUIDE V 11.1.X, Configuration Manual

Page: 119 / 366

range: 4.4.4.1 to 4.4.4.32
pool: pool2 netmask: 255.255.255.0 prefix length: 24
range: 1.1.1.1 to 1.1.1.24
range: 2.2.2.1 to 2.2.2.55
■
Example 2
host1# show ip nat pool pool1
pool: pool1 netmask: 255.255.255.0 prefix length: 24
range: 3.3.3.1 to 3.3.3.255
range: 4.4.4.1 to 4.4.4.32
■
See show ip nat pool.
Displaying Inside and Outside Rule Settings
The show ip nat inside rule and show ip nat outside rule commands display access
list and pool usage for all dynamic translation rules configured for the virtual router.
If you do not specify an access list, the output displays address pool associations for
each of the access lists for either inside or outside translation rules in the virtual
router. Specifying an access list filters the output to display only the address pool
associated with the specified list.
show ip nat inside rule
■
Use to display NAT access list and pool usage information for inside source
translation rules.
■
Field descriptions
■
access list name—Name of the access list
■
pool name—Name of the address pool
■
rule type—Type of rule assigned
■
Example
host1# show ip nat inside rule
access list name: list1 pool name: poolA rule type: inside source
access list name: list2 pool name: poolB rule type: inside source
access list name: list3 pool name: poolC rule type: inside source overload
■
See show ip nat inside rule.
show ip nat outside rule
■
Use to display NAT access list and pool usage information for outside source
translation rules.
■
Field descriptions
■
access list name—Name of the access list
■
pool name—Name of the address pool
Monitoring NAT
■ 93
Chapter 2: Configuring NAT