Juniper IP SERVICES - CONFIGURATION GUIDE V 11.1.X Configuration Manual Download Page 276

Page: 276 / 366

■

Use to set the MTU for the tunnel.

■

Specify a value in the range 1024–10240 bytes.

■

Example

host1(config-if)#

tunnel mtu 7500

■

Use the

version to restore the default, 10240 bytes.

■

See tunnel mtu.

tunnel source

■

Use to configure the source of the tunnel.

■

Specify either the primary IP address or the type and specifier of an interface.

■

Do not specify an unnumbered interface.

■

Example 1—Primary IP address

host1(config)#

interface tunnel dvmrp:boston-tunnel-1

host1(config-if)#

tunnel source 192.10.2.1

■

Example 2—ATM interface on an ERX7xx model, ERX14xx model, or the ERX310
router that uses the

slot/port

format

host1(config)#

interface tunnel dvmrp:boston-tunnel-1

host1(config-if)#

tunnel source atm 5/0.12

■

Example 3—ATM interface on an E320 router that uses the

slot/adapter/port

format

host1(config)#

interface tunnel dvmrp:boston-tunnel-1

host1(config-if)#

tunnel source atm 5/1/0.12

■

Use the

version to remove the source of a tunnel.

■

See tunnel source.

Configuration Example

In this example, two GRE tunnel interfaces are configured on different virtual routers
of an E Series router. The source of the first tunnel interface matches the destination
of the second tunnel interface and vice versa.

NOTE:

This example contains an ATM interface configuration for an ERX7xx model,

ERX14xx model, or ERX310 router that uses the

slot/port

format.

Configure a virtual router called boston that supports one end of the tunnel.

host1#

virtual-router boston

250

■

Configuration Tasks

JUNOSe 11.1.x IP Services Configuration Guide

Summary of Contents for IP SERVICES - CONFIGURATION GUIDE V 11.1.X















































































































































































































































































































































































Search results

Summary of Contents for IP SERVICES - CONFIGURATION GUIDE V 11.1.X

Reviews:

Related manuals for IP SERVICES - CONFIGURATION GUIDE V 11.1.X

Brands by name

Popular brands

Juniper IP SERVICES - CONFIGURATION GUIDE V 11.1.X, Configuration Manual

Search results

Summary of Contents for IP SERVICES - CONFIGURATION GUIDE V 11.1.X

Reviews:

Related manuals for IP SERVICES - CONFIGURATION GUIDE V 11.1.X

Brands by name

Popular brands