Juniper IP SERVICES - CONFIGURATION GUIDE V 11.1.X Configuration Manual Download Page 279

Page: 279 / 366

Figure 20: Transport and Tunnel Networks Using Different Routing Protocols

Creating Multicast VPNs Using GRE Tunnels

For information about configuring multicast VPNs using GRE tunnels, see

Configuring

PIM for IPv4 Multicast

JUNOSe Multicast Routing Configuration Guide

Monitoring IP Tunnels

You can monitor DVMRP and GRE tunnels by using the following commands.

show dvmrp tunnel

■

Use to display information about DVMRP tunnels.

■

To view detailed information about tunnels, specify the

detail

keyword.

■

To view the number of tunnels in a specific state, specify the

state

keyword and

the state of the tunnel (disabled, down, enabled, lower-down, not-present, up).

■

To view the state of a specific tunnel, specify a tunnel name.

■

To view the number of tunnels associated with that IP address, specify an IP
address.

■

To view the number of tunnels associated with an IP address on the virtual router,
specify an IP address with the

virtual-router

keyword and the name of the virtual

router.

■

Field descriptions

■

Tunnel status

■

up—Tunnel is operational

■

down—Tunnel is not operational

■

not-present—Tunnel is not operational, because the hardware (such as
a line module) supporting the tunnel is inaccessible

■

Tunnel name—Name of the tunnel

■

Tunnel mtu—Value of the maximum transmission unit for the tunnel

■

Tunnel source address—IP address of the source of the tunnel

Monitoring IP Tunnels

■

253

Chapter 9: Configuring IP Tunnels

Summary of Contents for IP SERVICES - CONFIGURATION GUIDE V 11.1.X















































































































































































































































































































































































Search results

Summary of Contents for IP SERVICES - CONFIGURATION GUIDE V 11.1.X

Reviews:

Related manuals for IP SERVICES - CONFIGURATION GUIDE V 11.1.X

Brands by name

Popular brands

Juniper IP SERVICES - CONFIGURATION GUIDE V 11.1.X, Configuration Manual

Search results

Summary of Contents for IP SERVICES - CONFIGURATION GUIDE V 11.1.X

Reviews:

Related manuals for IP SERVICES - CONFIGURATION GUIDE V 11.1.X

Brands by name

Popular brands