Juniper IP SERVICES - CONFIGURATION GUIDE V 11.1.X, Configuration Manual

Page: 38 / 366

host1(config-route-map)# match ipv6 next-hop prefix-list next1
■
Use the no version to delete all next-hop match clauses from a route map unless
you specify a prefix list, in which case only that prefix list match is removed
from the route map.
■
See match ipv6 next-hop.
match ipv6 route-source
■
Use to match any routes that are advertised from addresses contained in the
specified prefix list.
■
Example
host1(config-route-map)# match ipv6 route-source prefix-list source
■
Use the no version to delete all route-source match clauses from a route map
unless you specify a prefix list, in which case only that prefix list match is
removed from the route map.
■
See match ipv6 route-source.
match level
■
Use to match routes for the specified level.
■
Example
host1(config-route-map)# match level level-1
■
Use the no version to delete the match clause from a route map or a specified
value from the match clause.
■
See match level.
match metric
■
Use to match a route for the specified metric value.
■
Example
host1(config-route-map)# match metric 10
■
Use the no version to delete the match clause from a route map or a specified
value from the match clause.
■
See match metric.
match metric-type
■
Use to match a route for the specified metric type.
■
Example
host1(config-route-map)# match metric-type external
12 ■
Route Maps
JUNOSe 11.1.x IP Services Configuration Guide