Juniper G10 CMTS, Hardware Manual

Page: 43 / 210

•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Hardware Component Overview
Chassis
27
Figure 11: AC Power Supply Front Panel
A fully populated chassis requires a nominal 1500 watts from an external power source. The
components of the chassis require 1000 watts (maximum) from the power supplies. The
aggregate power output from all voltage levels is 200 watts per power supply. Other electrical
characteristics are provided in Table 7 on page 28.
Input Range
100-240V
200W Hot Swap
The CMTS components do not consume their maximum
power at the same time. Therefore, the CMTS maximum
power requirement is less than the sum of the maximum
power consumed by each component installed in the
CMTS.