A-29 Super Tucano 60TP 1.1 2022
37
Above: JP ER-200 V1 controller with brakes showing retracts connections on upper side and brakes outputs on
lower side. Note the correct polarity of wires as written at controller case.
Above: Above: JP ER-200 V1 electronic controller installation diagram.
BE SURE TO PLUG THE BATTERY TO THE CONTROLLER IN CORRECT POLARITY (+ RED WIRE AND
–
BLACK
WIRE). IF POLARITY IS INVERTED THE CONTROLLER WILL BURN AND BE UNUSABLE, AND THE PRODUCT
WARRANTY WILL BE LOST. USE A RELIABLE JST PLUG IN YOUR BATTERY WITH ADEQUATE FITTING WITH NO
POSSIBILITY OF BEING PLUGGED INVERTED.
DO NOT PLUG THE RETRACTS DIRECTLY INTO THE RECEIVER
WITHOUT CONNECTION TO THE CONTROLLER, OR THE ELECTRIC MOTORS MAY BURN OUT, VOIDING THE
PRODUCT WARRANTY.
Above: retract set operation sequence diagram with the V-1 controller option.
