A-29 Super Tucano 60TP 1.1 2022
34
Above: the rudder servo can be instalLED on a plywood table glued with 30 to 40 minutes epoxy glue at the
bottom of the fuselage in the case of using the pull-pull system.
Retracts Installation: (105º on front and 85º on mains)
The A-29 Super Tucano 60TP Juniaer is prepared for easy installation of retracts, which can be pneumatic
(actuated by compressed air) or electric (actuated by electric motors). The photos above show the
measurements of the retracts bases and compartments. The wing retracts fixing bases are made in 10mm
plywood and the front ones in epoxy resin with 10mm plywood and are solid enough to withstand the efforts
required by the normal performance of the model aircraft. When defining the drilling locations for fixing the
retracts to the bases, check that the wheels are centered in the compartments when retracted and that the tire
alignment is parallel on the 2 sides of the wing and on the front.
