A-29 Super Tucano 60TP 1.1 2022
11
Above: exhausts position installed on turbine.
Above: cutted exhausts position on turbine for realistic and scale appearance.
Very important: all fuel hoses and turbine cables must not, under any circumstances, come into contact with
parts of the turbine block that are very hot during and after operation. For this, we recommend fixing them to
the mount with nylon clamps firmly and without the possibility of moving.
The most suitable turbine exhaust outlets according to the scale of the model aircraft are 55mm in diameter,
0.2mm thick, with 90 degrees of deflection and 100 radius of curvature. We recommend those made of stainless
steel by Zimmermman Schalldämpfer code #5060. We recommend water-based thermal protection paint with
ceramic microspheres manufactured by BVM Jets code PA-MA-1940 (down-left).
We recommend the instaltion of o FOD screen to protect the air intake to avoid solid parcticles absorving by
the turbine (below a direita).
