A-29 Super Tucano 60TP 1.1 2022
22
Above: Futaba BLS156HV (left), Futaba BLS175SV (center) and JR DS8611A (right).
If using pneumatic retracts it is necessary 1 more standard size servo with 4Kg-cm (56,8oz-in) or more torque
for air valve command. Suggestions: SAVOX: SAVSC0254MG, SAVSC0253MG, SAVSC0252MG
Above: standard size servos dimentions (left) and Savox SC0252MG (right).
For front wheel steering 1 standard size servos 8,9kg-cm or more torque is necessary. Suggestions: Futaba
S-3305, Savox SAVSC0252MG.
The model airplane has structural reinforcements of high rigidity for installation of the ailerons, flaps,
elevators and rudder controls control horns. These points measure 5cm x 5cm, are positioned in strategic
locations and must be identified according to the instructions below. If you want to modify or adapt equipment
that requires modifications to the original design, never do this on your own. Please contact Juniaer through
our service channels to check on the possibility of installation.
All horns must be heavy duty and suitable for ¼ scale model aircraft or for giant scale model aircraft. All servo
arms must be heavy duty and suitable for ¼ scale model aircraft or giant scale model aircraft. All rods must be
steel, with thread and diameter 4-40 or greater. All servo links and connectors must be heavy duty and suitable
for ¼ scale model aircraft or for giant scale model aircraft.
