A-29 Super Tucano 60TP 1.1 2022
3
This is the A-29 Super Tucano 60TP ARF Juniaer, retracts installation ready, with flaps, with artistic finishing
and several painting schemes available, very realistic and all detailed, with rivets, antennas, side door with hinge
and lock installed, panel divisions, compartments, pitot tubes replicas, landing gear doors, cockpit with panels
and clear canopy. Engine cowling in 2 parts with exhausts replicas. Made of high-quality epoxy resin with
structural reinforcements, low weight and high resistance due to the FULL COMPOSITE high technology vacuum
lamination technique. Carbon fiber tubes on wing and stabilizer. Laminated in fiberglass and epoxy resin with
carbon fiber reinforcements with laser cut plywood and balsa structures. Clear canopy, resin canopy frame,
resin cockpit with panels. Factory hinged ailerons, flaps and elevators in perfect alignment. Rudder to be
installed with carbon fiber hinges and steel rod supplied with the kit. Tank tray in laser cut plywood. Artistic
finishing made in automotive paint, vinyl, decals and varnished for great durability. Very stable, realistic and
acrobatic flight pattern. Capable of many scale maneuvers such as rolls, slow rolls, Cuban eight, knife edge flight,
inverted flight and more. This model was developed and built to provide high performance both in terms of
flight and in terms of realism and details richness. It´s construction is made with specific materials of high quality
and advanced techniques of composite lamination to offer low weight and high structural strength.
The Juniaer model airplanes are painted and varnished with high quality and resistance products. Even so,
some care must be taken to protect the paint: wipe your model with a cloth immediately after use with water
sprays and neutral detergent. Fuels can damage the varnish if it penetrates punctures or damages to the plane's
surface, as well as cuts in the engine's cowling. To prevent this kind of problem, we recommend brushing two-
component PU varnish or applying epoxy to areas that are uncovered for any reason. Avoid exposing the model
to direct sunlight as much as possible, especially the darker painted parts that accumulate and reflect a greater
amount of heat, causing an internal and external temperature raising. The use of automotive wax for polishing
is useful in preventing the accumulation of dirt and facilitates the cleaning and protection of the varnish. We
suggest the use of fabric smooth covers for storage and transport, in order to protect against damage and risks.
Be careful when handling your model airplane, especially the movable control surfaces. Never lift it by the two
wing tips only, as the total weight is considerable to be supported only by 2 distant points. When checking the
model airplane´s balance through the center of gravity (C.G.) always support it by the roots of the wing at the
indicated points.
Please read this manual to the end before doing anything on your model airplane, it contains important
information regarding assembly and use, and it will also give you an overview of what should be done correctly
and following the guidelines.
Please check and identify all parts of your model airplane when you receive it. If any parts are damaged or
defective, please contact our customer service. Your model aircraft has a 90-day factory warranty against
manufacturing defects. Juniaer Model Airplanes guarantees that this kit is free from manufacturing defects in
both material and workmanship at the date of purchase. This warranty does not cover any components
damaged by use or modifications. In no event will Juniaer's liability exceed the original cost of the kit purchased.
In addition, Juniaer Model Airplanes reserves the right to change this warranty without prior notice. Since
Juniaer Model Airplanes has no control over the final assembly or the equipment used for the final assembly,
no liability will be assumed or accepted for any damages resulting from the user's use of the final product
assembled by him or third parties. Through the act of using the assembled product by the user, he accepts all
responsibility for the result. If the buyer is not prepared to accept responsibility for the use of this product, it
must be returned immediately to the place of purchase in new and unused condition. This product is intended
for persons over 18 years old and any procedure involved in its assembly and use must be monitored by an
adult.
This is not a beginner´s model aircraft, despite having a very stable flight performance and low speed stall
point, it is a complex model with many mechanical and electronic devices and must be assembled and flown by
someone with experience and knowledge in the area of model airplanes setup and flying. Never consider this
