Jungheinrich DFG 660, Operating Instructions Manual

Page: 43 / 221

11
.1
4
E
N
44
2.2 Lifting the truck by crane
CAUTION!
The mast can get damaged
X Loading by crane is only intended for the initial transport before the truck is used
for the first time.
X Loading must be carried out by specially trained staff in accordance with
recommendations contained in Guidelines VDI 2700 and VDI 2703
DANGER!
Crane slings can tear, resulting in accidents
X
Only use crane lifting gear with sufficient capacity.
X
Loading weight = Net weight of truck (+ battery weight for electric trucks).
X The mast must be tilted back fully.
X
The crane lifting gear on the mast must have a minimum clear length of 2 m.
X Crane slings should be fastened in such a way that they do not come into contact
with any attachments or the overhead guard when lifting.
X
Do not stand under a swaying load.
X The truck should only be handled by people who are trained in using lifting slings
and tools.
X Wear safety shoes when lifting the truck by crane.
X Do not walk into or stand in a hazardous area.
X
Always attach the crane lifting gear to the prescribed strap points and prevent them
from slipping.
Z
Truck net weight: see "Data plate" on page 40.
Lifting the truck by crane
Requirements
– Park the truck securely, see "Parking the
truck securely" on page 103.
Procedure
• Secure the crane slings to the attachment
points (55) and (56.
• Raise and load the truck.
• Lower and deposit the truck carefully (see
"Parking the truck securely" on page 103).
• Secure the truck with wedges to prevent it
from rolling away.
This concludes the loading by crane.
56
55