Jungheinrich DFG 660, Operating Instructions Manual

Page: 162 / 221

163
11
.1
4
E
N
4.2 Lifting and jacking up the truck safely
WARNING!
A truck tipover can cause accidents
In order to raise the truck, use only suitable lifting gear at the points specially provided
for this purpose.
X Note the weight of the truck on the data plate.
X Always use a jack with a minimum capacity of 10000 kg kg.
X
Raise the unladen truck on a level surface.
X When raising the truck, take appropriate measures to prevent it from slipping or
tipping over (e.g. wedges, wooden blocks).
Raising and jacking up the truck securely
Requirements
– Prepare the truck for maintenance and repairs (see "Identification points and data
plates" on page 38).
Tools and Material Required
– Jack
– Hard wooden blocks
Procedure
• Place the jack against the contact point.
Z
Jack contact point, see "Preparing the truck for maintenance and repairs" on
page 162.
• Raise the truck.
• Support the truck with hard wooden blocks.
• Remove the jack.
The truck is now securely raised and jacked up.