Jungheinrich DFG 660, Operating Instructions Manual

Page: 196 / 221

197
11
.1
4
E
N
6 Safety tests to be performed at intervals and after unusual
incidents
Z
Perform a safety check in accordance with national regulations. The manufacturer
recommends the truck be checked to FEM guideline 4.004. The manufacturer has
a service department specially trained for these tasks.
The truck must be inspected at least annually (refer to national regulations) or after
any unusual event by a qualified inspector. The inspector shall assess the condition
of the system from purely a safety viewpoint, without regard to operational or
economic circumstances. The inspector must be sufficiently instructed and
experienced to be able to assess the condition of the truck and the effectiveness of
the safety mechanisms based on the technical regulations and principles governing
the inspection of forklift trucks.
A thorough test of the truck must be undertaken with regard to its technical condition
from a safety aspect. The truck must also be examined for damage caused by
possible improper use. A test report shall be produced. The test results must be kept
for at least the next 2 inspections.
The proprietor is responsible for ensuring that faults are immediately rectified.
Z
A test plaque is attached to the truck as proof that it has passed the safety
inspection. This plaque indicates the due date for the next inspection.