Jungheinrich DFG 660, Operating Instructions Manual

Page: 105 / 221

11
.1
4
E
N
106
6.6 Travel
WARNING!
Improper travel can result in accidents
X Do not get up from the driver’s seat during travel.
X Do not drive the truck unless your are wearing a seat belt and the panels and doors
are properly locked.
X Do not lean out of the truck while travelling.
X
Make sure that the travel area is clear.
X Adapt your travel speed to the route conditions in the work area and the load.
X Tilt the mast back and raise the fork carriage approx. 200 mm.
X
Make sure you have sufficient visibility when reversing.
Travel
Requirements
– Truck prepared for operation, see
"Preparing the truck for operation" on
page 99.
Procedure
• Release the parking brake, to do this
press the "F5" button (183).
• Choose the travel direction with the
travel direction switch (73).
• Raise the fork carriage approx. 200 mm.
• Tilt the mast back.
• Apply the accelerator pedal (75). The travel speed is governed by the accelerator
(75).
The truck travels in the direction selected.
183