Page 45 of 49
20320 1S IPS R
Firmware update
9 Firmware update
The device consists of a combination of the following devices:
- Power supply with IP interface
- Power supply with IP interface - Additional functions
There is only one combined update file for both devices with the ending “b03”.
The firmware update for both devices has to be imported via the physical address of the device
“Power supply with IP interface”.
9.1
Displaying firmware version
The current version of the firmware can only be displayed via the device “Power supply with IP interface -
Additional functions”.
• Perform right click on the device in the ETS.
•
Select “Info > Device Info”.
Firmware version is displayed behind the square brackets.
Example: ... [...] 1.3
9.2
Preparing firmware update
Requirements:
-
The firmware update can only be performed by the owner of the ETS licence and the ETS project.
- The device should not be protected by a password.
9.2.1 Deactivating secure commissioning
The device “Power supply with IP interface” has to be in unsecure commissioning mode before performing
the update.
•
Deactivate “Secure Commissioning” in device properties, see figure 5.
9.2.2 Downloading application program
The application program for the device “Power supply with IP interface” has to be downloaded before
performing the update.
• Perform right click on the device in the ETS.
•
Select “Download > Download Application”.
Application program is downloading automatically.
