Page 23 of 49
20320 1S IPS R
Configuration
Presence monitoring presence detector – Presence mode
Fig. 16: Presence monitoring presence detector – Presence mode
Function
Options
Description
Scene after trigger 1 is
activated again, if trigger 2 is
already active
active/inactive
Another scene can be activated
here when trigger 1 is activated
again and trigger 2 is already
activated. This scene can be used
e.g. for scenario “2nd person is
entering room”.
Scene Goodbye when
trigger 1 is activated again
and no presence is detected
active/inactive
Scene Goodbye can be activated
here. Scene Goodbye is activated
with time delay by activation of
trigger 1. But it is only activated if
trigger 2 is “OFF” or “not occupied”
during activation of scene. The time
delay is set with parameter “Run-on
time for trigger 2 before Goodbye
scene is started“.
