JUMO flowTRANS MAG S01, Technical Data Manual

Page: 15 / 57

V1.00/EN/00643259
Page 15/57 Data Sheet 406012
JUMO GmbH & Co. KG
Delivery address: Mackenrodtstraße 14
36039 Fulda, Germany
Postal address: 36035 Fulda, Germany
Phone: +49 661 6003-0
Fax: +49 661 6003-607
Email: mail@jumo.net
Internet: www.jumo.net
JUMO Instrument Co. Ltd.
JUMO House
Temple Bank, Riverway
Harlow, Essex CM20 2DY, UK
Phone: +44 1279 635533
Fax:
+44 1279 635262
Email: sales@jumo.co.uk
Internet: www.jumo.co.uk
JUMO Process Control, Inc.
6733 Myers Road
East Syracuse, NY 13057, USA
Phone: 315-437-5866
1-800-554-5866
Fax: 315-437-5860
Email: info.us@jumo.net
Internet: www.jumousa.com
40601200T10Z001K000
Transmitter
Electrical properties
Galvanic isolation
Current output, digital output (DO1 and DO2), and digital input are galvanically isolated from the sensor input circuit and each other. The same
applies for the signal outputs of the versions with PROFIBUS-PA.
Empty pipe detection
Requirements for the function:
• Conductivity of the medium to be measured of ≥ 20 µS/cm
• Signal cable length of ≤ 50 m (164 ft)
• Sensor without preamplifier
• Nominal width DN ≥ DN 10
Mechanical features
Temperatures
Protection type
Vibration according to EN 60068-2
Valid for:
Voltage supply AC 100 to 230 V (-15 %/+10 %)
AC 24 V (-30 %/+10 %)
DC 24 V (-30 %/+30 %), harmonics < 5 %
Supply frequency 47 to 64 Hz
Excitation frequency 6.25 HZ, 7.5 Hz, 12.5 Hz, 15 Hz, 25 Hz, 30 Hz
(50/60 Hz voltage supply)
Power consumption Sensor including transmitter
AC S
≤ 20 VA (switch-on current 8.8 A at AC 230 V)
DC P ≤ 12 W (switch-on current 5.6 A)
Electrical connection Screw terminals (maximum 2.5 mm² – AWG 14)
Compact design
Housing Aluminum casting, painted
Paint Paint coat ≥ 80 µm thick, RAL 5013 (cobalt blue)
Cable fitting Polyamide
Remote mount design
Housing Aluminum casting, painted
Paint Paint coat ≥ 80 µm thick, middle section RAL 5013 (cobalt blue)
Front lid/rear lid RAL 5013 (cobalt blue)
Cable fitting Polyamide
Weight 4.5 kg (9.92 lb)
Storage temperature -40 to +70 °C (-40 to +158 °F)
Ambient temperature -20 to +60 °C (-4 to +140 °F)
Transmitter housing IP65, IP67 (NEMA 4X)
Remote mount design In the range 10 to 58 Hz max. 0.15 mm (0.006 ″ ) amplitude
a
(Transmitter) In the range 58 to 150 Hz max. 2 g acceleration
a
a
= Peak load