8 Startup and parameterization
62
Available filters
1. If you do not wish to change any further parameters, go to the END function in the parameters menu
and press the
key in order to save the settings and return to the process level.
8.6.14
Resetting both counters
This function enables both counters to be reset.
1. If you do not wish to change any further parameters, go to the END function in the parameters menu
and press the
key in order to save the settings and return to the process level.
Filter 0:
measured
flow rate
Filter 3
Filter 6
Filter 9
Slower measurand output
Faster measurand output
NOTE!
Both counters are only reset if SAVE YES is confirmed when leaving the parameters menu.
NOTE!
The daily counter can be reset in the process level (
see chapter 8.4 "Using the navigation keys",
page 35) or via the digital input (
see chapter 8.6.12 "Configuring the digital input DI1", page 55).
TOTAL
RESET N
RESET Y
1. Reset both counters or not.
2. Confirm
FREQUENC.
