8 Startup and parameterization
54
Configuring the relay outputs DO2 and DO3 to switch a load when the device generates a warning
1. If you do not wish to change any further parameters, go to the END function in the parameters menu
and press the
key in order to save the settings and return to the process level.
When the device generates a warning message, the device status LED is orange.
The generation of a warning message can also be indicated by the switching of the transistor out-
put.
OUTPUT
DO2
WARNING
INV YES
INV NO
1. Choose the operating mode for
the relay output (inverted or not in-
verted).
DO3
DEL. 2 = 00
1. Enter the time delay before the
switching point (value between 0
and 99 s).
2. Confirm
