JUMO 709061/8-01-020, Operating Manual

Page: 34 / 125

3 Electrical connection
32 V1.04/EN/00561071 [Thyristor Power Switch TYA 201]
3.2.3 Type 709061/X-0X-150-XXX-XXX-XX-25X
Type 709061/X-0X-200-XXX-XXX-XX-25X
Devices with a load current of 150 A are equipped with plug-in screw terminals
in the control section and cable lugs in the power section.
Interfaces The connection for Modbus, RS422/485 is located on the front panel.
Terminal Version Conductor cross
section Maximum
tightening
torque
X2_1 and X2_2 Slotted screws, blade width 2 mm
0.2 to 1.5 mm
2 0.25 Nm
X3 Slotted screws, blade width 3 mm
0.5 to 2.5 mm
2 0.5 Nm
U2, U1 M8 hexagon screws, width across
flats 13 mm
95 to 150 mm
2 12 Nm
For UL applications, use only 75 °C copper conductors!
N/L2, V, L1 Slotted screws,
blade width 3 mm
0.5 to 4 mm
2
or
(0.5 to 2.5 mm
2
with ferrule)
(for UL application
AWG 20-12)
0.5 Nm
Ground terminal PE M8 setscrew with hexagon
nut, width across flats 13 mm Cable lug
hole: 8 mm 12 Nm
( 2) X2_
(X2_1)
(X8)
( ) X3
(U1)
(U2)
(N/L2)
(V)
(L1)
(PE)