JUMO 709061/8-01-020, Operating Manual

Page: 116 / 125

10 Technical data
114 V1.04/EN/00561071 [Thyristor Power Switch TYA 201]
10.3 Analog inputs
10.4 Analog output (actual value output)
10.4.1Display and measuring accuracy
All specifications refer to the power controller nominal data.
10.5 Digital inputs
10.6 Digital output (fault signal output)
Current 0 (4) to 20 mA R
i
= 50
Ω
Voltage 0 (2) to 10 V R
i
= 25 k
Ω
0 (1) to 5 V R
i
= 25 k
Ω
Analog output
Switched off as standard.
I
max
= 20 mA for standard signal voltage: 0 to 10 V, 2 to 10 V, 0 to 5 V up
to 1 to 5 V.
Burden max. 500
Ω
for standard signal current: 0 to 20 mA up to
4 to 20 mA
Depending on the device type, various internal measurands such as load
current, load voltage, or power can be output.
Mains voltage: ±2.5 % Load current: ±1 % Load voltage: ±1 % Power: ±2 %
Analog input
Voltage/current: ±1 % Analog output
Voltage/current: ±1 % Load resistance: ±2 %
(For resistive load)
+
TYA
12
11
Analog-
output
Digital input 1 For connection to potential-free contact
Digital input 2
Relay (changeover contact)
without contact protection
circuit 30,000 switching operations at a switching capacity of AC 230 V / 3 A
(1.5 A), 50 Hz, B300 (UL 508)
Optocoupler output I
Cmax
= 2 mA, U
CEOmax
= 32 V